Navigation:
Weblog / Archive by category 'Technical Resources'
Click on the image to view a larger version, click on the link below for the full pdf of each product detail
For further information, please Contact Us
D1 – Detail showing internal loading block wall supported off new raft
with loading membrane sealed to Newton 500 to the floor
D1 - Newton Construction Detail - Download PDF (154)
D3 – Detail showing internal loading block wall supported off Engineering Brick
where Newton 500 to the floor is above closed cell insulation
D3 - Newton Construction Detail - Download PDF (134)
D29 – Newton System 500 to concrete wall showing Cavity Wall Tie
screwed into Newton MultiPlug
D29 - Newton Construction Detail - Download PDF (144)
For AutoCad Files Of Any Of These Drawings Please Contact Us
D32 – Construction joint detail showing Floordrain
placed above construction joint
D32 - Newton Construction Detail - Download PDF (158)
D43 – Below ground flat soffit with tanking membrane dressed to
Newton 500 as part of Newton 500 Waterproofing System
D43 - Newton Construction Detail - Download PDF (120)
D55 – Connection of wall DPC to Newton 500 floor membrane
to open elevation
D55 - Newton Construction Detail - Download PDF (97)
D67 – Connection of Basedrain to externally sited Titan-Pro sump
(not shown) with 63mm O/D pipe
D67 - Newton Construction Detail - Download PDF (132)
Click on the image to view a larger version, click on the link below for the full pdf of each product detail
For further information, please Contact Us
P1 – Dimensions: Basedrain, Floordrain
and Basedrain Adapter to 63mm pipe
P1 - Newton Product Detail - Download PDF (152)
P2 – Dimensions: Advanced
Control Panel
P2 - Newton Product Detail - Download PDF (76)
P4 – Connections And Dimension
Of Newton Power Converter 1200C
P4 - Newton Product Detail - Download PDF (73)
For AutoCad Files Of Any Of These Drawings Please Contact Us
P5 – Dimensions: Baseboard and Parts
P5 - Newton Product Detail - Download PDF (87)
P6 – Dimensions: Newton NP 150 Pump
P6 - Newton Product Detail - Download PDF (74)
P7 – Dimensions: Newton NP 400 Pump
P7 - Newton Product Detail - Download PDF (85)
P11 – Dimensions: Newton Titan-Pro White Sump
P11 - Newton Product Detail - Download PDF (102)
Click on the image to view a larger version, click on the link below for the full pdf of each section drawing
For AutoCad files of any of these drawings, please Contact Us
RA 101 – Newton System 500 to new concrete structure showing
Newton Basedrain within closed cell insulation to the floor
RA 101 - Newton Section Detail - Download PDF (222)
RA 102 – Newton System 500 with Newton 508 Mesh to the wall and
Newton 508 above Basedrain and closed cell insulation to the floor
RA 102 - Newton Section Detail - Download PDF (185)
For AutoCad files of any of these drawings, please Contact Us
RA 103 – Newton System 500 showing Newton 508 to walls and floor
and Newton Floordrain sat above slab inside of load bearing block wall
RA 103 - Newton Section Detail - Download PDF (161)
SA 101 UH – Newton System 500 showing Newton 508 to walls and floor
and Newton Floordrain sat above slab within spacer of 50mm
closed cell insulation
SA 101 UH - Newton Section Detail - Download PDF (172)
SW 101 – Newton System 500 showing internal block wall supported off
engineering brick. Newton 508 to walls and Newton 501 Slimline to floor.
Basedrain in formed recess
SW 101 - Newton Section Detail - Download PDF (126)
VSW 103 – Newton System 500 to brick vault with 12.5mm plasterboard fixed to
timber battens fixed to the substrate with Newton MultiPlug. Basedrain sat within
recess cut to existing slab.
VSW 103 - Newton Section Detail - Download PDF (116)
